product description
Product Line: Hydraulic Puller Kits
- 3 different arm sizes with a maximum effective arm length of 200 mm make the TMHP 10E suitable for a wide range of applications
- Self-locking arms minimize the risk of the puller slipping out of the application under load
- The hydraulic spindle is equipped with a safety valve that limits the applied force to 100 kN, minimizing the risk of overloading the puller
- The hydraulic spindle has a long stroke of 80mm, which is convenient for one-time disassembly
- Hydraulic spindle extensions allow quick adaptation of the drawing length
Think safe
The manufacturer's load and stroke ratings are maximum safe limits. Good practice encourages using only 80% of these ratings!
Product Series
| model | TMHP 10E | |
|---|---|---|
| Description | Advanced Hydraulic Puller Kits | |
| General purpose overall assessment | Message | 1 x Arm assembly bracket |
| 3 arms, 115 mm (4.5 in) | ||
| 3 arms, 160 mm (6.3 in) | ||
| 3 arms, 200 mm (7.8 in) | ||
| 1 x Hydraulic spindle TMHS 100 | ||
| 3 × hydraulic spindle extensions; 50, 100 and 150 mm | ||
| 1 x objective lens turret with hydraulic spindle center point | ||
| Maximum stroke | 80 mm | |
| Nominal labor force | 100 kN | |
| weight | 15.8 kg | |
| Tapping hydraulic cylinder | UN 1½” x 16 tpi | |
| Jaw puller | Effective arm length, arm set 1 (TMHP10E-10) | 115 mm |
| Grip Width, Arm Set 1 | 75-170 mm | |
| Claw height | 8 mm | |
| Effective arm length, arm set 2 (TMHP10E-11) | 160 mm | |
| Grip Width, Arm Set 2 | 80-250 mm | |
| Claw height | 8 mm | |
| Effective arm length, arm set 3 (TMHP10E-12) | 200 mm | |
| Grip Width, Arm Set 3 | 110-280 mm | |
| Claw height | 8 mm |
